Adhesives

Fevicol Hiperstar

Fevicol

Fevicol Hiperstar is Pidilite's premium PVA wood adhesive, engineered for demanding professional furniture manufacture. Its enhanced formula delivers superior bond strength, extended open time for complex assemblies, and excellent water resistance compared to standard PVA grades — bonding wood, plywood, MDF, and blockboard with a clean, invisible glue line that sets to a hard, sand-able film.

Fevicol Marine

Fevicol

Fevicol Marine uses resorcinol-based chemistry to create a cross-linked polymer bond with exceptional resistance to water, humidity, and temperature cycling. Approved for exterior and marine woodworking, it is the adhesive of choice for outdoor furniture, bathroom joinery, boat building, and any project where moisture ingress is a long-term concern — with joints that outlast the surrounding material.

Fevicol SH

Fevicol

Fevicol SH is a synthetic rubber-based contact adhesive specifically formulated for bonding decorative laminates and veneers to plywood, MDF, and particle board. Apply to both surfaces, allow to dry touch-dry, then press firmly together for an instant permanent bond — no clamping required. The result is a perfectly flat, bubble-free surface that is heat-resistant and moisture-resistant, ready for trimming and finishing.

Fevicol Probound

Fevicol

Fevicol Probound is a D3-classified water-resistant PVA adhesive for professional woodworking where enhanced moisture resistance beyond standard D2 PVA grades is required. Its thixotropic formulation resists run-off on vertical surfaces, and fast initial strength development reduces clamping time — engineered for the workflow of the modern furniture factory producing bathroom and kitchen cabinetry.

Fevicol HeatX

Fevicol

Fevicol HeatX is a specialist contact adhesive engineered for applications where the bonded assembly will be exposed to elevated temperatures in service. Standard contact adhesives can soften and lose bond strength with heat — HeatX maintains full bond integrity at temperatures up to 80°C, making it the mandatory choice for kitchen countertops, cooking station surfaces, and any laminate application near heat sources.

Araldite Klear 5

Araldite

Araldite Klear 5 is a two-component epoxy that delivers a structural bond in just five minutes with a crystal-clear, water-white finish — the adhesive of choice for bonding glass, clear plastics, and any application where an invisible joint is required. When fully cured it delivers outstanding shear and peel strength, resistance to water and common solvents, and permanent gap-filling where surfaces don't mate perfectly.

Araldite Standard

Araldite

Araldite Standard is the original formulation that established Araldite as the world's most trusted structural adhesive brand. Its longer 90-minute working time accommodates large, complex assemblies where precise alignment is critical. The fully cured bond achieves the highest tensile strength in the Araldite range — making it the choice for structural repairs, engineering assemblies, and high-stress construction applications.

Araldite Clear 120

Araldite

Araldite Clear 120 combines optical clarity with enhanced flexibility and peel strength, featuring a 120-minute working time for large-format bonding operations. Its flexible cured state absorbs differential thermal expansion between dissimilar materials — making it excellent for bonding glass to metal frames, stone cladding to structural substrates, or architectural glass stairs and facades where substrate movement must be accommodated.